Architectural drawings in WC2E

Which WC2E postcodes does this drawing package service cover?

Every WC2E postcode district we draw in, the stock that dominates it and the authority that validates a drawing package there. WC2E fees below are the statutory England rates for 2026, not drawing package estimates.

How does a drawing package differ street by street across WC2E?

Roof pitch, wall build-up and plot depth change every few WC2E streets, and each one changes what a drawing package can achieve at that address.

• Inside WC2E: Covent Garden (WC2E, WC2H) — Georgian piazza, listed buildings defines Covent Garden, where georgian terraces, conversions set what a drawing package can do. Any Covent Garden drawing package is validated by Westminster City Council, with Royal Opera House the usual Covent Garden reference point on the site plan.
• Bordering WC2E: Mayfair (W1J, W1K) — drawing package work in Mayfair means georgian townhouses, listed buildings. Mayfair is Georgian listed townhouses, luxury. Westminster City Council decides the Mayfair application, and Berkeley Square anchors the Mayfair location plan.
• Bordering WC2E: Belgravia (SW1X, SW1W) — a drawing package in Belgravia starts from regency stucco terraces, listed buildings, and Belgravia reads as white stucco Regency terraces. in SW1X. Westminster City Council assesses Belgravia architectural drawings against its own Belgravia character guidance, and the location plan we draw for Belgravia references Eaton Square.
• Bordering WC2E: Marylebone (W1U, W1G, W1H) — a drawing package in Marylebone starts from georgian terraces, edwardian mansion blocks, and Marylebone reads as Georgian and Victorian terraces, mansion blocks. in W1U. Westminster City Council assesses Marylebone architectural drawings against its own Marylebone character guidance, and the location plan we draw for Marylebone references Marylebone High Street.
• Bordering WC2E: Pimlico (SW1V) — Regency stucco terraces, grid plan defines Pimlico, where regency terraces, post-war estates set what a drawing package can do. Any Pimlico drawing package is validated by Westminster City Council, with Tate Britain the usual Pimlico reference point on the site plan.
• Bordering WC2E: Soho (W1D, W1F) — a drawing package in Soho starts from georgian terraces, mixed-use, and Soho reads as Georgian fragments, mixed-use. in W1D. Westminster City Council assesses Soho architectural drawings against its own Soho character guidance, and the location plan we draw for Soho references Soho Square.
• Bordering WC2E: St John's Wood (NW8) — drawing package work in St John's Wood means victorian villas, mansion blocks. St John's Wood is Victorian villas, mansion blocks. Westminster City Council decides the St John's Wood application, and Lord's Cricket Ground anchors the St John's Wood location plan.
• Bordering WC2E: Bayswater (W2) — Victorian stucco terraces defines Bayswater, where victorian stucco terraces set what a drawing package can do. Any Bayswater drawing package is validated by Westminster City Council, with Hyde Park the usual Bayswater reference point on the site plan.
• Bordering WC2E: Paddington (W2) — a drawing package in Paddington starts from regency terraces, modern apartments, and Paddington reads as Regency and Victorian terraces, canal-side regen. in W2. Westminster City Council assesses Paddington architectural drawings against its own Paddington character guidance, and the location plan we draw for Paddington references Paddington Basin.
• Bordering WC2E: Victoria (SW1E, SW1W) — Regency terraces, mixed-use defines Victoria, where regency terraces, post-war flats set what a drawing package can do. Any Victoria drawing package is validated by Westminster City Council, with Victoria Station the usual Victoria reference point on the site plan.

Does WC2E planning policy restrict a drawing package?

Conservation areas covering WC2E (Covent Garden): Westminster City Council runs 56, and Pimlico, Soho, Covent Garden are the ones WC2E (Covent Garden) owners meet most. A drawing package inside a WC2E (Covent Garden) conservation area loses permitted development, so the WC2E (Covent Garden) submission is a householder application at £548 decided in 8 weeks — not a £249 prior approval decided in 6 weeks. In Mayfair a drawing package is judged on the street elevation first.

WC2E (Covent Garden) and Article 4: Multiple Article 4 Directions — office-to-residential restrictions, HMO conversions, retail to residential in shopping zones. A drawing package planned at a WC2E address is checked against that direction first; Westminster City Council publishes the WC2E (Covent Garden) extent, and the WC2E line rarely follows the WC2E (Covent Garden) boundary you would expect.

WC2E (Covent Garden) below-ground policy: Westminster basement policy restricts to single-storey, typically under 50% of rear garden footprint; lightwells and rooflights strictly controlled in conservation areas. Any drawing package in WC2E (Covent Garden) that goes below existing foundations triggers two months notice under section 6 of the Party Wall etc. Act 1996, and Westminster City Council will want the WC2E ground and groundwater position set out.

The building fabric around WC2E (Covent Garden): Grand Georgian and Regency terraces in Belgravia and Pimlico; Victorian and Edwardian mansion blocks; heritage-rich townhouses throughout; very high listed building density. Heritage-first planning approach; listed buildings on almost every street; basement and rear extension policies particularly strict. A drawing package in WC2E (Covent Garden) is scoped against that stock first, because it decides whether the scheme runs as permitted development, a £274 Lawful Development Certificate, or a full £548 application to Westminster City Council.

Who decides a drawing package on the edge of WC2E?

• City of London — cross the WC2E (Covent Garden) boundary and City of London Corporation takes the drawing package instead, applying 27 conservation areas of its own around EC1. We re-price architectural drawings at the WC2E (Covent Garden) edge because City of London policy and Westminster policy rarely align on drawing package depth.
• Camden — adjoining WC2E (Covent Garden), with 40 conservation areas centred on NW1. A drawing package on the far side of the WC2E (Covent Garden) line is determined by Camden Council, so the WC2E (Covent Garden) quote for architectural drawings is checked against Camden guidance before it is issued.
• Kensington and Chelsea — cross the WC2E (Covent Garden) boundary and RBKC Planning takes the drawing package instead, applying 38 conservation areas of its own around SW1. We re-price architectural drawings at the WC2E (Covent Garden) edge because Kensington and Chelsea policy and Westminster policy rarely align on drawing package depth.
• Wandsworth — adjoining WC2E (Covent Garden), with 45 conservation areas centred on SW8. A drawing package on the far side of the WC2E (Covent Garden) line is determined by Wandsworth Council, so the WC2E (Covent Garden) quote for architectural drawings is checked against Wandsworth guidance before it is issued.

Sources for this WC2E drawing package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.