Architectural drawings in W1B

Which postcode districts around W1B do we cover for drawing package work?

Every W1B postcode district we draw in, the stock that dominates it and the authority that validates a drawing package there. W1B fees below are the statutory England rates for 2026, not drawing package estimates.

Which W1B neighbourhoods suit a drawing package best?

Roof pitch, wall build-up and plot depth change every few W1B streets, and each one changes what a drawing package can achieve at that address.

• Bordering W1B: Mayfair (W1J, W1K) — Georgian listed townhouses, luxury defines Mayfair, where georgian townhouses, listed buildings set what a drawing package can do. Any Mayfair drawing package is validated by Westminster City Council, with Berkeley Square the usual Mayfair reference point on the site plan.
• Bordering W1B: Belgravia (SW1X, SW1W) — a drawing package in Belgravia starts from regency stucco terraces, listed buildings, and Belgravia reads as white stucco Regency terraces. in SW1X. Westminster City Council assesses Belgravia architectural drawings against its own Belgravia character guidance, and the location plan we draw for Belgravia references Eaton Square.
• Bordering W1B: Marylebone (W1U, W1G, W1H) — a drawing package in Marylebone starts from georgian terraces, edwardian mansion blocks, and Marylebone reads as Georgian and Victorian terraces, mansion blocks. in W1U. Westminster City Council assesses Marylebone architectural drawings against its own Marylebone character guidance, and the location plan we draw for Marylebone references Marylebone High Street.
• Bordering W1B: Pimlico (SW1V) — drawing package work in Pimlico means regency terraces, post-war estates. Pimlico is Regency stucco terraces, grid plan. Westminster City Council decides the Pimlico application, and Tate Britain anchors the Pimlico location plan.
• Bordering W1B: Soho (W1D, W1F) — Georgian fragments, mixed-use defines Soho, where georgian terraces, mixed-use set what a drawing package can do. Any Soho drawing package is validated by Westminster City Council, with Soho Square the usual Soho reference point on the site plan.
• Bordering W1B: Covent Garden (WC2E, WC2H) — a drawing package in Covent Garden starts from georgian terraces, conversions, and Covent Garden reads as Georgian piazza, listed buildings. in WC2E. Westminster City Council assesses Covent Garden architectural drawings against its own Covent Garden character guidance, and the location plan we draw for Covent Garden references Royal Opera House.
• Bordering W1B: St John's Wood (NW8) — Victorian villas, mansion blocks defines St John's Wood, where victorian villas, mansion blocks set what a drawing package can do. Any St John's Wood drawing package is validated by Westminster City Council, with Lord's Cricket Ground the usual St John's Wood reference point on the site plan.
• Bordering W1B: Bayswater (W2) — drawing package work in Bayswater means victorian stucco terraces. Bayswater is Victorian stucco terraces. Westminster City Council decides the Bayswater application, and Hyde Park anchors the Bayswater location plan.
• Bordering W1B: Paddington (W2) — a drawing package in Paddington starts from regency terraces, modern apartments, and Paddington reads as Regency and Victorian terraces, canal-side regen. in W2. Westminster City Council assesses Paddington architectural drawings against its own Paddington character guidance, and the location plan we draw for Paddington references Paddington Basin.
• Bordering W1B: Victoria (SW1E, SW1W) — drawing package work in Victoria means regency terraces, post-war flats. Victoria is Regency terraces, mixed-use. Westminster City Council decides the Victoria application, and Victoria Station anchors the Victoria location plan.

Does W1B planning policy restrict a drawing package?

W1B (Regent Street) conservation designations: there are 56 across Westminster City Council, Belgravia, Marylebone, Pimlico among them. Designation costs a W1B (Regent Street) owner the permitted-development route: a drawing package then needs a £548 householder application over 8 weeks, in place of the £249 prior approval route that takes 6 weeks. Mayfair is the W1B (Regent Street) designation that most often changes a drawing package design.

Article 4 and your W1B (Regent Street) drawing package: Multiple Article 4 Directions — office-to-residential restrictions, HMO conversions, retail to residential in shopping zones. At a W1B address that matters twice over, because Westminster City Council applies the direction unevenly across W1B (Regent Street) — we read the W1B (Regent Street) policies map for the exact W1B address before quoting architectural drawings.

Digging below a W1B (Regent Street) property: Westminster basement policy restricts to single-storey, typically under 50% of rear garden footprint; lightwells and rooflights strictly controlled in conservation areas. Where a drawing package in W1B (Regent Street) involves excavation that is read beside the Party Wall etc. Act 1996, which needs two months notice for a W1B (Regent Street) dig within 3 m of a neighbour, and Westminster City Council expects the W1B ground conditions addressed in the application.

What W1B (Regent Street) is built from: Grand Georgian and Regency terraces in Belgravia and Pimlico; Victorian and Edwardian mansion blocks; heritage-rich townhouses throughout; very high listed building density. Heritage-first planning approach; listed buildings on almost every street; basement and rear extension policies particularly strict. That mix decides the drawing package route in W1B (Regent Street) more than the postcode does, and it is what a Westminster City Council case officer reads first. A householder application costs £548 paid to Westminster City Council direct, with 8 weeks to a decision once validated.

Who decides a drawing package on the edge of W1B?

• Camden — cross the W1B (Regent Street) boundary and Camden Council takes the drawing package instead, applying 40 conservation areas of its own around NW1. We re-price architectural drawings at the W1B (Regent Street) edge because Camden policy and Westminster policy rarely align on drawing package depth.
• Kensington and Chelsea — adjoining W1B (Regent Street), with 38 conservation areas centred on SW1. A drawing package on the far side of the W1B (Regent Street) line is determined by RBKC Planning, so the W1B (Regent Street) quote for architectural drawings is checked against Kensington and Chelsea guidance before it is issued.
• Wandsworth — cross the W1B (Regent Street) boundary and Wandsworth Council takes the drawing package instead, applying 45 conservation areas of its own around SW8. We re-price architectural drawings at the W1B (Regent Street) edge because Wandsworth policy and Westminster policy rarely align on drawing package depth.
• Lambeth — the Lambeth boundary runs against Westminster, so a drawing package a street from W1B (Regent Street) is decided by Lambeth Council instead. Lambeth runs 64 conservation areas across SE1 and its neighbours, which is why architectural drawings priced for W1B (Regent Street) are re-checked against Lambeth policy whenever the W1B (Regent Street) address sits on that edge.

Sources for this W1B drawing package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.