Architectural drawings in WC1A

Which WC1A postcodes does this drawing package service cover?

Every WC1A postcode district we draw in, the stock that dominates it and the authority that validates a drawing package there. WC1A fees below are the statutory England rates for 2026, not drawing package estimates.

What changes about a drawing package in each part of WC1A?

Roof pitch, wall build-up and plot depth change every few WC1A streets, and each one changes what a drawing package can achieve at that address.

• Bordering WC1A: Camden Town (NW1) — a drawing package in Camden Town starts from victorian terraces, mansion blocks, and Camden Town reads as dense mixed-use, Victorian terraces, canal-side. in NW1. Camden Council assesses Camden Town architectural drawings against its own Camden Town character guidance, and the location plan we draw for Camden Town references Camden Market.
• Bordering WC1A: Hampstead (NW3) — a drawing package in Hampstead starts from georgian and victorian villas, listed buildings, and Hampstead reads as affluent, listed Georgian and Victorian villas. in NW3. Camden Council assesses Hampstead architectural drawings against its own Hampstead character guidance, and the location plan we draw for Hampstead references Hampstead Heath.
• Bordering WC1A: Primrose Hill (NW1) — boutique village atmosphere, painted terraces defines Primrose Hill, where victorian and edwardian terraces set what a drawing package can do. Any Primrose Hill drawing package is validated by Camden Council, with Primrose Hill park the usual Primrose Hill reference point on the site plan.
• Bordering WC1A: Kentish Town (NW5) — a drawing package in Kentish Town starts from victorian terraces, and Kentish Town reads as Victorian terraced streets, gentrifying. in NW5. Camden Council assesses Kentish Town architectural drawings against its own Kentish Town character guidance, and the location plan we draw for Kentish Town references Kentish Town City Farm.
• Bordering WC1A: Belsize Park (NW3) — drawing package work in Belsize Park means edwardian mansion blocks, victorian villas. Belsize Park is tree-lined avenues, Edwardian mansion blocks. Camden Council decides the Belsize Park application, and Belsize Park station anchors the Belsize Park location plan.
• Bordering WC1A: Bloomsbury (WC1) — drawing package work in Bloomsbury means georgian terraces, listed buildings. Bloomsbury is Georgian squares, academic. Camden Council decides the Bloomsbury application, and British Museum anchors the Bloomsbury location plan.
• Bordering WC1A: Fitzrovia (W1T) — Georgian and Victorian mix, creative quarter defines Fitzrovia, where georgian terraces, victorian mansion blocks set what a drawing package can do. Any Fitzrovia drawing package is validated by Camden Council, with Fitzroy Square the usual Fitzrovia reference point on the site plan.
• Bordering WC1A: King's Cross (N1C) — drawing package work in King's Cross means modern apartments, converted warehouses. King's Cross is regenerated quarter, contemporary new-build. Camden Council decides the King's Cross application, and King's Cross Station anchors the King's Cross location plan.
• Bordering WC1A: Highgate (N6) — drawing package work in Highgate means georgian villas, victorian and edwardian semis. Highgate is village character on the hill, Georgian and Victorian. Camden Council decides the Highgate application, and Highgate Cemetery anchors the Highgate location plan.
• Bordering WC1A: Swiss Cottage (NW3, NW6) — drawing package work in Swiss Cottage means mansion blocks, post-war flats. Swiss Cottage is mansion blocks and post-war flats. Camden Council decides the Swiss Cottage application, and Swiss Cottage Library anchors the Swiss Cottage location plan.

What local planning policy applies to a drawing package in WC1A?

WC1A (Bloomsbury) conservation designations: there are 40 across Camden Council, Primrose Hill, Bloomsbury, Camden Town among them. Designation costs a WC1A (Bloomsbury) owner the permitted-development route: a drawing package then needs a £548 householder application over 8 weeks, in place of the £249 prior approval route that takes 6 weeks. Bloomsbury is the WC1A (Bloomsbury) designation that most often changes a drawing package design.

What Article 4 removes near WC1A (Bloomsbury): Article 4 removes permitted development for HMO conversions (C3 to C4) across the borough, plus restrictions on basement extensions in 12 conservation areas. Before pricing a drawing package we check whether the WC1A address is inside the mapped area, because Camden Council draws the WC1A (Bloomsbury) boundary street by street rather than across the whole of WC1A (Bloomsbury).

WC1A (Bloomsbury) below-ground policy: Camden's basement policy (Policy A5) restricts single-storey basements to 50% of garden area; double-storey basements generally refused outside commercial zones. Any drawing package in WC1A (Bloomsbury) that goes below existing foundations triggers two months notice under section 6 of the Party Wall etc. Act 1996, and Camden Council will want the WC1A ground and groundwater position set out.

WC1A (Bloomsbury) housing stock: Victorian and Edwardian terraces, Georgian townhouses in Bloomsbury and Hampstead, post-war mansion blocks, modern developments in King's Cross. Creative, affluent in Hampstead and Primrose Hill; dense mixed-use around Camden Town and Kings Cross; academic character in Bloomsbury. Read that before choosing a drawing package route in WC1A (Bloomsbury) — construction, not postcode, sets what is achievable. Camden Council charges £548 for a householder application and has 8 weeks to determine it.

Who decides a drawing package on the edge of WC1A?

• Westminster — adjoining WC1A (Bloomsbury), with 56 conservation areas centred on SW1. A drawing package on the far side of the WC1A (Bloomsbury) line is determined by Westminster City Council, so the WC1A (Bloomsbury) quote for architectural drawings is checked against Westminster guidance before it is issued.
• Islington — cross the WC1A (Bloomsbury) boundary and Islington Council takes the drawing package instead, applying 40 conservation areas of its own around N1. We re-price architectural drawings at the WC1A (Bloomsbury) edge because Islington policy and Camden policy rarely align on drawing package depth.
• Barnet — cross the WC1A (Bloomsbury) boundary and Barnet Council takes the drawing package instead, applying 20 conservation areas of its own around N2. We re-price architectural drawings at the WC1A (Bloomsbury) edge because Barnet policy and Camden policy rarely align on drawing package depth.
• Haringey — adjoining WC1A (Bloomsbury), with 29 conservation areas centred on N4. A drawing package on the far side of the WC1A (Bloomsbury) line is determined by Haringey Council, so the WC1A (Bloomsbury) quote for architectural drawings is checked against Haringey guidance before it is issued.

Sources for this WC1A drawing package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.