Architectural drawings in N6

Which postcode districts around N6 do we cover for drawing package work?

Every N6 postcode district we draw in, the stock that dominates it and the authority that validates a drawing package there. N6 fees below are the statutory England rates for 2026, not drawing package estimates.

Which N6 neighbourhoods suit a drawing package best?

Roof pitch, wall build-up and plot depth change every few N6 streets, and each one changes what a drawing package can achieve at that address.

• Inside N6: Highgate (N6) — drawing package work in Highgate means georgian villas, victorian and edwardian semis. Highgate is village character on the hill, Georgian and Victorian. Camden Council decides the Highgate application, and Highgate Cemetery anchors the Highgate location plan.
• Inside N6: Highgate (Haringey) (N6) — a drawing package in Highgate (Haringey) starts from georgian villas, victorian terraces, and Highgate (Haringey) reads as Georgian and Victorian villages. in N6. Haringey Council assesses Highgate (Haringey) architectural drawings against its own Highgate (Haringey) character guidance, and the location plan we draw for Highgate (Haringey) references Highgate Wood.
• Bordering N6: Camden Town (NW1) — a drawing package in Camden Town starts from victorian terraces, mansion blocks, and Camden Town reads as dense mixed-use, Victorian terraces, canal-side. in NW1. Camden Council assesses Camden Town architectural drawings against its own Camden Town character guidance, and the location plan we draw for Camden Town references Camden Market.
• Bordering N6: Hampstead (NW3) — a drawing package in Hampstead starts from georgian and victorian villas, listed buildings, and Hampstead reads as affluent, listed Georgian and Victorian villas. in NW3. Camden Council assesses Hampstead architectural drawings against its own Hampstead character guidance, and the location plan we draw for Hampstead references Hampstead Heath.
• Bordering N6: Primrose Hill (NW1) — boutique village atmosphere, painted terraces defines Primrose Hill, where victorian and edwardian terraces set what a drawing package can do. Any Primrose Hill drawing package is validated by Camden Council, with Primrose Hill park the usual Primrose Hill reference point on the site plan.
• Bordering N6: Kentish Town (NW5) — a drawing package in Kentish Town starts from victorian terraces, and Kentish Town reads as Victorian terraced streets, gentrifying. in NW5. Camden Council assesses Kentish Town architectural drawings against its own Kentish Town character guidance, and the location plan we draw for Kentish Town references Kentish Town City Farm.
• Bordering N6: Belsize Park (NW3) — tree-lined avenues, Edwardian mansion blocks defines Belsize Park, where edwardian mansion blocks, victorian villas set what a drawing package can do. Any Belsize Park drawing package is validated by Camden Council, with Belsize Park station the usual Belsize Park reference point on the site plan.
• Bordering N6: Bloomsbury (WC1) — drawing package work in Bloomsbury means georgian terraces, listed buildings. Bloomsbury is Georgian squares, academic. Camden Council decides the Bloomsbury application, and British Museum anchors the Bloomsbury location plan.
• Bordering N6: Fitzrovia (W1T) — Georgian and Victorian mix, creative quarter defines Fitzrovia, where georgian terraces, victorian mansion blocks set what a drawing package can do. Any Fitzrovia drawing package is validated by Camden Council, with Fitzroy Square the usual Fitzrovia reference point on the site plan.
• Bordering N6: King's Cross (N1C) — a drawing package in King's Cross starts from modern apartments, converted warehouses, and King's Cross reads as regenerated quarter, contemporary new-build. in N1C. Camden Council assesses King's Cross architectural drawings against its own King's Cross character guidance, and the location plan we draw for King's Cross references King's Cross Station.

How do conservation areas and Article 4 affect a drawing package in N6?

N6 (Highgate) conservation designations: there are 40 across Camden Council, Fitzrovia, Hampstead, Primrose Hill among them. Designation costs a N6 (Highgate) owner the permitted-development route: a drawing package then needs a £548 householder application over 8 weeks, in place of the £249 prior approval route that takes 6 weeks. Bloomsbury is the N6 (Highgate) designation that most often changes a drawing package design.

N6 (Highgate) and Article 4: Article 4 removes permitted development for HMO conversions (C3 to C4) across the borough, plus restrictions on basement extensions in 12 conservation areas. A drawing package planned at a N6 address is checked against that direction first; Camden Council publishes the N6 (Highgate) extent, and the N6 line rarely follows the N6 (Highgate) boundary you would expect.

N6 (Highgate) below-ground policy: Camden's basement policy (Policy A5) restricts single-storey basements to 50% of garden area; double-storey basements generally refused outside commercial zones. Any drawing package in N6 (Highgate) that goes below existing foundations triggers two months notice under section 6 of the Party Wall etc. Act 1996, and Camden Council will want the N6 ground and groundwater position set out.

N6 (Highgate) housing stock: Victorian and Edwardian terraces, Georgian townhouses in Bloomsbury and Hampstead, post-war mansion blocks, modern developments in King's Cross. Creative, affluent in Hampstead and Primrose Hill; dense mixed-use around Camden Town and Kings Cross; academic character in Bloomsbury. Read that before choosing a drawing package route in N6 (Highgate) — construction, not postcode, sets what is achievable. Camden Council charges £548 for a householder application and has 8 weeks to determine it.

N6 (Highgate) conservation designations: there are 29 across Haringey Council, Bruce Castle, Highgate Village, Muswell Hill among them. Designation costs a N6 (Highgate) owner the permitted-development route: a drawing package then needs a £548 householder application over 8 weeks, in place of the £249 prior approval route that takes 6 weeks. Crouch End is the N6 (Highgate) designation that most often changes a drawing package design.

N6 (Highgate) and Article 4: Borough-wide Article 4 for HMO conversions. A drawing package planned at a N6 address is checked against that direction first; Haringey Council publishes the N6 (Highgate) extent, and the N6 line rarely follows the N6 (Highgate) boundary you would expect.

N6 (Highgate) housing stock: Edwardian terraces in Crouch End, Muswell Hill; Victorian two-up-two-downs in Harringay Ladder; 1930s semi-detached in Muswell Hill; post-war in Tottenham. Muswell Hill and Crouch End have strong conservation coverage with clear loft/mansard precedents; Tottenham generally permissive. Read that before choosing a drawing package route in N6 (Highgate) — construction, not postcode, sets what is achievable. Haringey Council charges £548 for a householder application and has 8 weeks to determine it.

What happens if a N6 property sits on a boundary?

• Barnet — the Barnet boundary runs against Camden, so a drawing package a street from N6 (Highgate) is decided by Barnet Council instead. Barnet runs 20 conservation areas across N2 and its neighbours, which is why architectural drawings priced for N6 (Highgate) are re-checked against Barnet policy whenever the N6 (Highgate) address sits on that edge.
• Haringey — cross the N6 (Highgate) boundary and Haringey Council takes the drawing package instead, applying 29 conservation areas of its own around N4. We re-price architectural drawings at the N6 (Highgate) edge because Haringey policy and Camden policy rarely align on drawing package depth.
• Brent — cross the N6 (Highgate) boundary and Brent Council takes the drawing package instead, applying 22 conservation areas of its own around NW2. We re-price architectural drawings at the N6 (Highgate) edge because Brent policy and Camden policy rarely align on drawing package depth.
• City of London — adjoining N6 (Highgate), with 27 conservation areas centred on EC1. A drawing package on the far side of the N6 (Highgate) line is determined by City of London Corporation, so the N6 (Highgate) quote for architectural drawings is checked against City of London guidance before it is issued.
• Waltham Forest — cross the N6 (Highgate) boundary and Waltham Forest Council takes the drawing package instead, applying 17 conservation areas of its own around E4. We re-price architectural drawings at the N6 (Highgate) edge because Waltham Forest policy and Haringey policy rarely align on drawing package depth.
• Hackney — the Hackney boundary runs against Haringey, so a drawing package a street from N6 (Highgate) is decided by Hackney Council instead. Hackney runs 29 conservation areas across E2 and its neighbours, which is why architectural drawings priced for N6 (Highgate) are re-checked against Hackney policy whenever the N6 (Highgate) address sits on that edge.
• Islington — cross the N6 (Highgate) boundary and Islington Council takes the drawing package instead, applying 40 conservation areas of its own around N1. We re-price architectural drawings at the N6 (Highgate) edge because Islington policy and Haringey policy rarely align on drawing package depth.
• Camden — the Camden boundary runs against Haringey, so a drawing package a street from N6 (Highgate) is decided by Camden Council instead. Camden runs 40 conservation areas across NW1 and its neighbours, which is why architectural drawings priced for N6 (Highgate) are re-checked against Camden policy whenever the N6 (Highgate) address sits on that edge.

Sources for this N6 drawing package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.