Architectural drawings in W1F

Which W1F postcodes does this drawing package service cover?

Every W1F postcode district we draw in, the stock that dominates it and the authority that validates a drawing package there. W1F fees below are the statutory England rates for 2026, not drawing package estimates.

Which W1F neighbourhoods suit a drawing package best?

Roof pitch, wall build-up and plot depth change every few W1F streets, and each one changes what a drawing package can achieve at that address.

• Inside W1F: Soho (W1D, W1F) — drawing package work in Soho means georgian terraces, mixed-use. Soho is Georgian fragments, mixed-use. Westminster City Council decides the Soho application, and Soho Square anchors the Soho location plan.
• Bordering W1F: Mayfair (W1J, W1K) — a drawing package in Mayfair starts from georgian townhouses, listed buildings, and Mayfair reads as Georgian listed townhouses, luxury. in W1J. Westminster City Council assesses Mayfair architectural drawings against its own Mayfair character guidance, and the location plan we draw for Mayfair references Berkeley Square.
• Bordering W1F: Belgravia (SW1X, SW1W) — white stucco Regency terraces defines Belgravia, where regency stucco terraces, listed buildings set what a drawing package can do. Any Belgravia drawing package is validated by Westminster City Council, with Eaton Square the usual Belgravia reference point on the site plan.
• Bordering W1F: Marylebone (W1U, W1G, W1H) — Georgian and Victorian terraces, mansion blocks defines Marylebone, where georgian terraces, edwardian mansion blocks set what a drawing package can do. Any Marylebone drawing package is validated by Westminster City Council, with Marylebone High Street the usual Marylebone reference point on the site plan.
• Bordering W1F: Pimlico (SW1V) — a drawing package in Pimlico starts from regency terraces, post-war estates, and Pimlico reads as Regency stucco terraces, grid plan. in SW1V. Westminster City Council assesses Pimlico architectural drawings against its own Pimlico character guidance, and the location plan we draw for Pimlico references Tate Britain.
• Bordering W1F: Covent Garden (WC2E, WC2H) — drawing package work in Covent Garden means georgian terraces, conversions. Covent Garden is Georgian piazza, listed buildings. Westminster City Council decides the Covent Garden application, and Royal Opera House anchors the Covent Garden location plan.
• Bordering W1F: St John's Wood (NW8) — Victorian villas, mansion blocks defines St John's Wood, where victorian villas, mansion blocks set what a drawing package can do. Any St John's Wood drawing package is validated by Westminster City Council, with Lord's Cricket Ground the usual St John's Wood reference point on the site plan.
• Bordering W1F: Bayswater (W2) — drawing package work in Bayswater means victorian stucco terraces. Bayswater is Victorian stucco terraces. Westminster City Council decides the Bayswater application, and Hyde Park anchors the Bayswater location plan.
• Bordering W1F: Paddington (W2) — a drawing package in Paddington starts from regency terraces, modern apartments, and Paddington reads as Regency and Victorian terraces, canal-side regen. in W2. Westminster City Council assesses Paddington architectural drawings against its own Paddington character guidance, and the location plan we draw for Paddington references Paddington Basin.
• Bordering W1F: Victoria (SW1E, SW1W) — Regency terraces, mixed-use defines Victoria, where regency terraces, post-war flats set what a drawing package can do. Any Victoria drawing package is validated by Westminster City Council, with Victoria Station the usual Victoria reference point on the site plan.

Does W1F planning policy restrict a drawing package?

W1F (Soho) conservation designations: there are 56 across Westminster City Council, Belgravia, Marylebone, Pimlico among them. Designation costs a W1F (Soho) owner the permitted-development route: a drawing package then needs a £548 householder application over 8 weeks, in place of the £249 prior approval route that takes 6 weeks. St John's Wood is the W1F (Soho) designation that most often changes a drawing package design.

W1F (Soho) and Article 4: Multiple Article 4 Directions — office-to-residential restrictions, HMO conversions, retail to residential in shopping zones. A drawing package planned at a W1F address is checked against that direction first; Westminster City Council publishes the W1F (Soho) extent, and the W1F line rarely follows the W1F (Soho) boundary you would expect.

W1F (Soho) below-ground policy: Westminster basement policy restricts to single-storey, typically under 50% of rear garden footprint; lightwells and rooflights strictly controlled in conservation areas. Any drawing package in W1F (Soho) that goes below existing foundations triggers two months notice under section 6 of the Party Wall etc. Act 1996, and Westminster City Council will want the W1F ground and groundwater position set out.

The building fabric around W1F (Soho): Grand Georgian and Regency terraces in Belgravia and Pimlico; Victorian and Edwardian mansion blocks; heritage-rich townhouses throughout; very high listed building density. Heritage-first planning approach; listed buildings on almost every street; basement and rear extension policies particularly strict. A drawing package in W1F (Soho) is scoped against that stock first, because it decides whether the scheme runs as permitted development, a £274 Lawful Development Certificate, or a full £548 application to Westminster City Council.

Which neighbouring authorities border W1F?

• Wandsworth — the Wandsworth boundary runs against Westminster, so a drawing package a street from W1F (Soho) is decided by Wandsworth Council instead. Wandsworth runs 45 conservation areas across SW8 and its neighbours, which is why architectural drawings priced for W1F (Soho) are re-checked against Wandsworth policy whenever the W1F (Soho) address sits on that edge.
• Lambeth — cross the W1F (Soho) boundary and Lambeth Council takes the drawing package instead, applying 64 conservation areas of its own around SE1. We re-price architectural drawings at the W1F (Soho) edge because Lambeth policy and Westminster policy rarely align on drawing package depth.
• City of London — the City of London boundary runs against Westminster, so a drawing package a street from W1F (Soho) is decided by City of London Corporation instead. City of London runs 27 conservation areas across EC1 and its neighbours, which is why architectural drawings priced for W1F (Soho) are re-checked against City of London policy whenever the W1F (Soho) address sits on that edge.
• Camden — adjoining W1F (Soho), with 40 conservation areas centred on NW1. A drawing package on the far side of the W1F (Soho) line is determined by Camden Council, so the W1F (Soho) quote for architectural drawings is checked against Camden guidance before it is issued.

Sources for this W1F drawing package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.