Where in Camden does a 1930s semi project actually get determined?
Every Camden postcode district we draw in, the stock that dominates
it and the authority that validates a 1930s semi project there. Camden fees below are the
statutory England rates for 2026, not 1930s semi project estimates.
| Postcode | Area | Dominant stock | What it means for a 1930s semi project |
|---|
| W1T | Fitzrovia | Georgian terraces, Victorian mansion blocks | A 1930s semi project in Fitzrovia may land with Camden Council or Westminster City Council — W1T crosses the boundary, and the W1T policies map decides it street by street. |
| WC1A | Bloomsbury | Victorian and Edwardian terraces | Bloomsbury sits wholly inside WC1A, so Camden Council validates every 1930s semi project submitted from an WC1A address. |
| WC1H | Bloomsbury / Cartwright Gardens | Victorian and Edwardian terraces | Bloomsbury / Cartwright Gardens sits wholly inside WC1H, so Camden Council validates every 1930s semi project submitted from an WC1H address. |
| WC1N | Bloomsbury / Russell Square | Victorian and Edwardian terraces | Bloomsbury / Russell Square sits wholly inside WC1N, so Camden Council validates every 1930s semi project submitted from an WC1N address. |
| WC1R | Holborn | Victorian and Edwardian terraces | WC1R covers Holborn only; Camden Council handles the 1930s semi project, and Holborn case officers apply the WC1R conservation-area map. |
What changes about a 1930s semi project in each part of Camden?
Roof pitch, wall build-up and plot depth change every few Camden
streets, and each one changes what a 1930s semi project can achieve at that address.
- Hampstead (NW3) — affluent, listed Georgian and Victorian villas defines Hampstead, where georgian and victorian villas, listed buildings set what a 1930s semi project can do. across NW3. Any Hampstead 1930s semi project is validated by Camden Council, with Hampstead Heath the usual Hampstead reference point on the site plan.
- Primrose Hill (NW1) — boutique village atmosphere, painted terraces defines Primrose Hill, where victorian and edwardian terraces set what a 1930s semi project can do. across NW1. Any Primrose Hill 1930s semi project is validated by Camden Council, with Primrose Hill park the usual Primrose Hill reference point on the site plan.
- Kentish Town (NW5) — a 1930s semi project in Kentish Town starts from victorian terraces, and Kentish Town reads as Victorian terraced streets, gentrifying. in NW5. Camden Council assesses Kentish Town 1930s semi projects against its own Kentish Town character guidance, and the location plan we draw for Kentish Town references Kentish Town City Farm.
- Belsize Park (NW3) — a 1930s semi project in Belsize Park starts from edwardian mansion blocks, victorian villas, and Belsize Park reads as tree-lined avenues, Edwardian mansion blocks. in NW3. Camden Council assesses Belsize Park 1930s semi projects against its own Belsize Park character guidance, and the location plan we draw for Belsize Park references Belsize Park station.
- Bloomsbury (WC1) — Georgian squares, academic defines Bloomsbury, where georgian terraces, listed buildings set what a 1930s semi project can do. across WC1. Any Bloomsbury 1930s semi project is validated by Camden Council, with British Museum the usual Bloomsbury reference point on the site plan.
- Fitzrovia (W1T) — a 1930s semi project in Fitzrovia starts from georgian terraces, victorian mansion blocks, and Fitzrovia reads as Georgian and Victorian mix, creative quarter. in W1T. Camden Council assesses Fitzrovia 1930s semi projects against its own Fitzrovia character guidance, and the location plan we draw for Fitzrovia references Fitzroy Square.
- King's Cross (N1C) — regenerated quarter, contemporary new-build defines King's Cross, where modern apartments, converted warehouses set what a 1930s semi project can do. across N1C. Any King's Cross 1930s semi project is validated by Camden Council, with King's Cross Station the usual King's Cross reference point on the site plan.
Does Camden planning policy restrict a 1930s semi project?
Camden conservation designations: there are 40 across Camden Council, Camden Town, Fitzrovia, Hampstead among them. Designation costs a Camden owner the permitted-development route: a 1930s semi project then needs a £258 householder application over 8 weeks, in place of the £120 prior approval route that takes 6 weeks. Camden Town is the Camden designation that most often changes a 1930s semi project design.
Article 4 and your Camden 1930s semi project: Article 4 removes permitted development for HMO conversions (C3 to C4) across the borough, plus restrictions on basement extensions in 12 conservation areas. At a N1C address that matters twice over, because Camden Council applies the direction unevenly across Camden — we read the Camden policies map for the exact N1C address before quoting 1930s semi projects.
Digging below a Camden property: Camden's basement policy (Policy A5) restricts single-storey basements to 50% of garden area; double-storey basements generally refused outside commercial zones. Where a 1930s semi project in Camden involves excavation that is read beside the Party Wall etc. Act 1996, which needs two months notice for a Camden dig within 3 m of a neighbour, and Camden Council expects the N1C ground conditions addressed in the application.
What Camden is built from: Victorian and Edwardian terraces, Georgian townhouses in Bloomsbury and Hampstead, post-war mansion blocks, modern developments in King's Cross. Creative, affluent in Hampstead and Primrose Hill; dense mixed-use around Camden Town and Kings Cross; academic character in Bloomsbury. That mix decides the 1930s semi project route in Camden more than the postcode does. Our fixed fee for 1930s semi projects in Camden starts at £840, against £1,750 for the Complete package that carries a Camden scheme through Camden Council planning and building regulations together.
Which neighbouring authorities border Camden?
- Barnet — adjoining Camden, with 20 conservation areas centred on N2. A 1930s semi project on the far side of the Camden line is determined by Barnet Council, so the Camden quote for 1930s semi projects is checked against Barnet guidance before it is issued.
- Haringey — the Haringey boundary runs against Camden, so a 1930s semi project a street from Camden is decided by Haringey Council instead. Haringey runs 29 conservation areas across N4 and its neighbours, which is why 1930s semi projects priced for Camden are re-checked against Haringey policy whenever the Camden address sits on that edge.
- Brent — cross the Camden boundary and Brent Council takes the 1930s semi project instead, applying 22 conservation areas of its own around NW2. We re-price 1930s semi projects at the Camden edge because Brent policy and Camden policy rarely align on 1930s semi project depth.
- City of London — cross the Camden boundary and City of London Corporation takes the 1930s semi project instead, applying 27 conservation areas of its own around EC1. We re-price 1930s semi projects at the Camden edge because City of London policy and Camden policy rarely align on 1930s semi project depth.
Sources for this Camden 1930s semi project page: borough policies maps and
conservation-area registers (2025–26), Royal Mail postcode district boundaries,
the Town and Country Planning (Fees for Applications) (England) Regulations, the Town
and Country Planning (General Permitted Development) (England) Order 2015 as amended,
and the Party Wall etc. Act 1996.
