Full design + planning + regs cost in Wandsworth

Which postcode districts around Wandsworth do we cover for full project cost package work?

Every Wandsworth postcode district we draw in, the stock that dominates it and the authority that validates a full project cost package there. Wandsworth fees below are the statutory England rates for 2026, not full project cost package estimates.

Which Wandsworth neighbourhoods suit a full project cost package best?

Roof pitch, wall build-up and plot depth change every few Wandsworth streets, and each one changes what a full project cost package can achieve at that address.

• Balham (SW12) — Victorian and Edwardian terraces defines Balham, where victorian and edwardian terraces set what a full project cost package can do. Any Balham full project cost package is validated by Wandsworth Council, with Balham High Road the usual Balham reference point on the site plan.
• Tooting (SW17) — full project cost package work in Tooting means edwardian terraces. Tooting is Edwardian terraces, vibrant high street. Wandsworth Council decides the Tooting application, and Tooting Market anchors the Tooting location plan.
• Wandsworth Common (SW17, SW18) — full project cost package work in Wandsworth Common means victorian villas and terraces. Wandsworth Common is Victorian villas around the common. Wandsworth Council decides the Wandsworth Common application, and Wandsworth Common anchors the Wandsworth Common location plan.
• Earlsfield (SW18) — full project cost package work in Earlsfield means victorian terraces. Earlsfield is Victorian terraced streets. Wandsworth Council decides the Earlsfield application, and Earlsfield station anchors the Earlsfield location plan.
• Putney (SW15) — Edwardian terraces, riverside defines Putney, where edwardian terraces, victorian villas, mansion blocks set what a full project cost package can do. Any Putney full project cost package is validated by Wandsworth Council, with Putney Bridge the usual Putney reference point on the site plan.
• Southfields (SW18) — full project cost package work in Southfields means 1930s semi-detached, edwardian terraces. Southfields is 1930s semi-detached, grid plan. Wandsworth Council decides the Southfields application, and Southfields station anchors the Southfields location plan.
• Tonsleys (SW18) — a full project cost package in Tonsleys starts from victorian terraces, and Tonsleys reads as Victorian conservation area. in SW18. Wandsworth Council assesses Tonsleys full project cost packages against its own Tonsleys character guidance, and the location plan we draw for Tonsleys references Tonsley Hill.

How do conservation areas and Article 4 affect a full project cost package in Wandsworth?

How designation changes a Wandsworth full project cost package: Wandsworth Council maintains 45 conservation areas, including Magdalen Park, Nightingale Triangle, Wandsworth Common. Inside any of them a Wandsworth full project cost package cannot rely on permitted development, and the route becomes a £548 householder application determined in 8 weeks rather than a £249 prior approval in 6 weeks. Wandsworth Common sets the tone for Wandsworth casework.

What Article 4 removes near Wandsworth: Article 4 for HMO conversions covering the whole borough. Before pricing a full project cost package we check whether the SW11 address is inside the mapped area, because Wandsworth Council draws the Wandsworth boundary street by street rather than across the whole of Wandsworth.

What Wandsworth is built from: Extensive Victorian terraced streets — the classic London side-return extension opportunity; Edwardian villas around the commons; 1930s semi-detached in Southfields. Family-oriented, high side-return extension and loft conversion rates; planning department experienced with Victorian terrace modifications. That mix decides the full project cost package route in Wandsworth more than the postcode does.

Which neighbouring authorities border Wandsworth?

• Lambeth — the Lambeth boundary runs against Wandsworth, so a full project cost package a street from Wandsworth is decided by Lambeth Council instead. Lambeth runs 64 conservation areas across SE1 and its neighbours, which is why full project cost packages priced for Wandsworth are re-checked against Lambeth policy whenever the Wandsworth address sits on that edge.
• Merton — the Merton boundary runs against Wandsworth, so a full project cost package a street from Wandsworth is decided by Merton Council instead. Merton runs 28 conservation areas across SW16 and its neighbours, which is why full project cost packages priced for Wandsworth are re-checked against Merton policy whenever the Wandsworth address sits on that edge.
• Kingston upon Thames — the Kingston upon Thames boundary runs against Wandsworth, so a full project cost package a street from Wandsworth is decided by Kingston Council instead. Kingston upon Thames runs 22 conservation areas across KT1 and its neighbours, which is why full project cost packages priced for Wandsworth are re-checked against Kingston upon Thames policy whenever the Wandsworth address sits on that edge.
• Richmond upon Thames — adjoining Wandsworth, with 72 conservation areas centred on SW13. A full project cost package on the far side of the Wandsworth line is determined by Richmond Council, so the Wandsworth quote for full project cost packages is checked against Richmond upon Thames guidance before it is issued.

Sources for this Wandsworth full project cost package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.