020 7864 7245 [email protected] WhatsApp

Full design + planning + regs cost in Camden

Pre-set example. Adjust the size below to recalculate.

Estimate uses Camden Council build-cost premium and typical full design + planning + regs ranges for Camden.

Architectural planning drawings for a London project — architectural drawings in Camden
Book a call

Speak to a chartered technologist — free 15 minutes

Pick a slot that suits you. No obligation and no sales pressure, just straight answers on your planning route.

Full design + planning + regs cost in Camden — a measured survey being recorded on site
A measured survey being recorded on site — full design + planning + regs cost in Camden.

Which Camden postcodes does this full project cost package service cover?

Every Camden postcode district we draw in, the stock that dominates it and the authority that validates a full project cost package there. Camden fees below are the statutory England rates for 2026, not full project cost package estimates.

PostcodeAreaDominant stockWhat it means for a full project cost package
WC1VHolbornVictorian and Edwardian terracesWC1V covers Holborn only; Camden Council handles the full project cost package.
WC1XBloomsbury / Mount PleasantVictorian and Edwardian terracesBloomsbury / Mount Pleasant is split at WC1X. Either Camden Council or Islington Council can determine a full project cost package here, so the WC1X address is checked against both policies maps first.
EC1NHatton GardenVictorian and Edwardian terracesHatton Garden sits wholly inside EC1N, so Camden Council validates every full project cost package submitted from an EC1N address.
N19Archway / Tufnell ParkVictorian terraces, post-war flatsN19 straddles a boundary: Archway / Tufnell Park addresses fall to Islington Council or Camden Council, so confirm which authority validates the full project cost package before submitting N19 drawings.
NW2Cricklewood / NeasdenEdwardian villas and terracesCricklewood / Neasden is split at NW2. Either Brent Council or Barnet Council or Camden Council can determine a full project cost package here, so the NW2 address is checked against both policies maps first.
NW8St John's WoodVictorian villas, mansion blocksA full project cost package in St John's Wood may land with Westminster City Council or Camden Council — NW8 crosses the boundary, and the NW8 policies map decides it street by street.
WC2BCovent Garden / HolbornVictorian and Edwardian terracesWC2B straddles a boundary: Covent Garden / Holborn addresses fall to Westminster City Council or Camden Council, so confirm which authority validates the full project cost package before submitting WC2B drawings.

What changes about a full project cost package in each part of Camden?

Roof pitch, wall build-up and plot depth change every few Camden streets, and each one changes what a full project cost package can achieve at that address.

What local planning policy applies to a full project cost package in Camden?

Camden conservation designations: there are 40 across Camden Council, Hampstead, Primrose Hill, Bloomsbury among them. Designation costs a Camden owner the permitted-development route: a full project cost package then needs a £548 householder application over 8 weeks, in place of the £249 prior approval route that takes 6 weeks. Fitzrovia is the Camden designation that most often changes a full project cost package design.

What Article 4 removes near Camden: Article 4 removes permitted development for HMO conversions (C3 to C4) across the borough, plus restrictions on basement extensions in 12 conservation areas. Before pricing a full project cost package we check whether the N1C address is inside the mapped area, because Camden Council draws the Camden boundary street by street rather than across the whole of Camden.

Camden below-ground policy: Camden's basement policy (Policy A5) restricts single-storey basements to 50% of garden area; double-storey basements generally refused outside commercial zones. Any full project cost package in Camden that goes below existing foundations triggers two months notice under section 6 of the Party Wall etc. Act 1996, and Camden Council will want the N1C ground and groundwater position set out.

The building fabric around Camden: Victorian and Edwardian terraces, Georgian townhouses in Bloomsbury and Hampstead, post-war mansion blocks, modern developments in King's Cross. Creative, affluent in Hampstead and Primrose Hill; dense mixed-use around Camden Town and Kings Cross; academic character in Bloomsbury. A full project cost package in Camden is scoped against that stock first.

Which neighbouring authorities border Camden?

Sources for this Camden full project cost package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.

Lock the price with a real fixed quote

Start quoteOr contact us about your project first
A printed planning application drawing set — proposed elevations, floor plans and the os location plan with the site outlined in red — full design + planning + regs cost in Camden
The planning set that goes to the council through the Planning Portal: proposed elevations, plans, and the OS location plan with your site outlined.

Found this useful? Share it

Copies the headline and the link, ready to paste anywhere — helpful if you are planning an extension with a neighbour, builder or architect.

Free quote in 60 seconds
Call us Free quote →

Before you go…

Get a free, no-obligation quote for your project. MCIAT chartered.

council-ready drawing review · All 33 London boroughs