Loft Conversion Drawings in Belmont | From £1,225

No Article 4 Direction covers Sutton, which keeps the Belmont permitted-development route open on unlisted houses. Belmont reads as 1930s semi-detached, and that character is precisely what a Sutton Council case officer tests a proposal against. Inside the Cheam Village boundary — one of 17 such designations in Sutton — a Belmont scheme normally goes straight to a full Sutton Council application rather than relying on permitted development. We confirm the SM2 designation at survey rather than assuming it.

We check Article 4 directions against the Belmont address first — it changes what is worth drawing. On Belmont stock the constraint is physical before it is planning: the 1930s semi-detached fixes the rear wall line and the Belmont station roofline caps the ridge. The borough policy layer over every SM2 address is set out on Sutton planning. The Belmont survey then carries into planning permission in Belmont if the project runs on to construction.

London Borough of Sutton takes one to two weeks to validate a Belmont submission. Survey first: we measure the Belmont property in person, then draw the existing plans, sections and elevations from that data.

Statutory periods: 8 weeks from validation for a householder application, 13 weeks for a major scheme, 6 weeks for prior approval with a 21 days neighbour consultation, and 5 weeks for a full plans building control submission. A party structure notice requires one month notice and two months where excavation is involved.

Neighbour consultation on a Belmont case runs 21 days from registration. The SM2 pack is issued at 1:100 and 1:50 with a 1:1250 location plan.

London Borough of Sutton weighs material objections only — a Belmont neighbour disliking the design is not one. Existing structure in the 1930s semi-detached is identified at survey, not guessed later.

Party wall procedure catches most SM2 owners late; on Belmont stock assume it applies and serve in good time. Once consent is granted, building regulations drawings follows for the SM2 property.

Belmont is characterised by 1930s semi-detached, concentrated across SM2 in the Sutton / Belmont area. On Belmont streets the 1930s semi-detached sets the structural grammar for everything that follows. Locally that resolves to this: the 1930s hipped roof here needs a hip-to-gable before a rear dormer works, which pushes the volume calculation toward the 50 m³ permitted-development ceiling. For a Belmont owner it decides the structural spec. Height on a Belmont proposal is measured against its neighbours, not against a policy number; the Belmont station terraces set that datum.

Lower-ground schemes in Belmont answer to neighbours and groundwater. house extension drawings for SM2 properties and architectural drawings build on the existing Belmont survey data.

What the Belmont drawing pack contains

What lands in your inbox after a Belmont survey:

• existing roof plan and section for the Belmont property
• proposed dormer elevations
• volume calculation sheet
• staircase and head-height sections
• structural steel layout

Local landmarks that shape a Belmont application

• Belmont station — a Belmont roof extension is judged against the datum it sets.
• Banstead Hospital — it anchors the Belmont streetscape argument in an officer report.
• Royal Marsden Hospital — a Belmont roof extension is judged against the datum it sets.

Getting to a Belmont survey

Surveyors travel to SM2 addresses from the studio; the nearest stations are Belmont, Sutton, Epsom Downs. Appointments are booked in Belmont on weekdays and Saturdays, and the measured survey of a standard 1930s semi-detached takes two to three hours.

Where Belmont sits

Belmont lies 10.8 miles (17.4 km) south-southwest of Charing Cross, on Ordnance Survey grid reference TQ253620. That grid reference is not trivia — the Belmont site location plan is drawn over it, and Sutton Council validates the address against it. Source.

Practical detail for a Belmont submission: local stations are Belmont and Sutton and Epsom Downs; correspondence uses SUTTON; dialling code 020; nearby listed fabric is Grade I Site of Nature Conservation Interest. Site plans are drawn to the address as Sutton Council holds it.

Belmont postcode coverage

Across SM2 (Sutton / Belmont), shared with Cheam the survey is the same; the Sutton policy overlay is not, and Sutton Council validates on the address.

Streets and stations in Belmont

Most Belmont sites are within walking distance of Belmont or Sutton or Epsom Downs. and Grade I Site of Nature Conservation Interest is listed, which pulls neighbouring SM2 proposals into a setting assessment.

Areas we cover around Belmont

Our patch runs Wimbledon Village (SW19), Raynes Park (SW20), Morden (SM4), Mitcham (CR4), Colliers Wood (SW19), South Wimbledon (SW19), with Belmont at its centre.

The fee follows the building. On Belmont stock that means party walls, levels, and the Cheam Village heritage question.

Statutory application fees are set by regulation, not by the council: £548 householder, £610 for a new dwelling, £274 for a lawful development certificate, £249 for prior approval.

We do not mark up the London Borough of Sutton fee — it is paid at submission. London planning approval-rate dataset · Sutton planning · Loft Conversion Drawings London-wide · loft conversion drawings in Wimbledon Village.

The technologist who surveys your Belmont property signs the drawings. Borderline is normal in Belmont; we resolve it with Sutton Council before submission rather than after refusal.

Drawings are produced by chartered members of the Chartered Institute of Architectural Technologists (MCIAT), the professional body for technical design and building-regulations competence. First-time approval across our London caseload is 98%. Statutory fees shown are those in force in England in 2026 under the Town and Country Planning (Fees for Applications) Regulations. Confirm your local authority at gov.uk and submission requirements on the Planning Portal. Studio: 71–75 Shelton Street, London WC2H 9JQ.

We survey Belmont properties within a few days of instruction. This Belmont page was reviewed in August 2026.