Architectural Drawings in Fitzrovia | Fixed-Fee Plans

An Article 4 Direction applies across Camden, so check it before assuming Fitzrovia permitted development survives. Fitzrovia reads as Georgian and Victorian mix, creative quarter, and that character is precisely what a Camden Council case officer tests a proposal against. Fitzrovia sits close enough to Bloomsbury that designation should be checked at the outset, not after design. Designation status for the W1T address is established first.

Article 4 directions are checked street by street in Fitzrovia; the borough-wide answer is rarely the whole answer. The georgian terraces governs the numbers on a Fitzrovia site: rear wall, eaves, and how far a ridge can rise beside Fitzroy Square. The borough policy layer over every W1T address is set out on Camden planning. The Fitzrovia survey then carries into house extension drawings in Fitzrovia if the project runs on to construction.

An incomplete Fitzrovia pack sits in the London Borough of Camden validation queue. Survey first: we measure the Fitzrovia property in person, then draw the existing plans, sections and elevations from that data.

Statutory periods: 8 weeks from validation for a householder application, 13 weeks for a major scheme, 6 weeks for prior approval with a 21 days neighbour consultation, and 5 weeks for a full plans building control submission. A party structure notice requires one month notice and two months where excavation is involved.

Officer queries on a Fitzrovia application come to us, not to you. The set is checked against the London Borough of Camden validation list before it goes in.

A W1T objection about light or overlooking carries more weight than one about taste. Levels between front and rear of a Fitzrovia house are recorded, not assumed.

On Fitzrovia terraces the flank wall is usually shared, so the party wall notice should go out well before work starts. Once consent is granted, planning permission follows for the W1T property.

Fitzrovia is characterised by georgian terraces, victorian mansion blocks, concentrated across W1T in the Fitzrovia area. The georgian terraces is the constraint that shapes most Fitzrovia projects, long before policy enters the picture. What that means for a W1T address: georgian houses here are rarely square, so the survey is set out from a laser control network rather than assumed right angles. On a Fitzrovia terrace it governs the rear opening width. The prevailing Fitzrovia eaves line is the reference Camden Council uses, which is why the proposed elevation is drawn with the neighbours on it.

A Fitzrovia basement stands on its drainage and party wall evidence. Where the project also touches building regulations drawings for W1T properties or loft conversion drawings, the same measured survey of the Fitzrovia property carries across — you pay for the survey once, not per application.

What the Fitzrovia drawing pack contains

Contents of the W1T drawing pack:

• laser measured survey for the Fitzrovia property
• existing floor plans at 1:50
• proposed floor plans
• all elevations
• site and location plans

Streets and landmarks we survey around Fitzrovia

• Fitzroy Square — frontages visible from the highway, so Bloomsbury materials detail governs the Fitzroy Square elevation.
• Charlotte Street — side returns where the 45-degree amenity test decides how far a Charlotte Street extension goes.
• Rathbone Place — shared flank walls, so Rathbone Place party structure notices go out before work starts.
• Gresse Street — closet wings that change how a rear extension meets the Gresse Street back addition.
• Euston Road — shared flank walls, so Euston Road party structure notices go out before work starts.
• Oxford Street — terraced rear elevations — the Oxford Street party wall position is drawn first.
• Great Portland Street — frontages visible from the highway, so Bloomsbury materials detail governs the Great Portland Street elevation.
• Tottenham Court Road — side returns where the 45-degree amenity test decides how far a Tottenham Court Road extension goes.
• Fitzroy Square — height and massing nearby are argued against this frontage.
• BT Tower — massing on adjoining W1T plots is tested against it.
• Southbank International School — massing on adjoining W1T plots is tested against it.
• Fashion Retail Academy — sightlines from here are part of the Camden Council character assessment.
• Middlesex Hospital — schemes visible from it get closer scrutiny in Camden.

Getting to a Fitzrovia survey

Surveyors travel to W1T addresses from the studio; the nearest stations are Euston, Paddington, Marylebone, London King's Cross. Appointments are booked in Fitzrovia on weekdays and Saturdays, and the measured survey of a standard georgian terraces takes two to three hours.

Where Fitzrovia sits

on Ordnance Survey grid reference TQ292821, inside the Holborn and St Pancras parliamentary constituency. A W1T submission is checked against exactly that location before Camden Council will register it. Source.

Practical detail for a Fitzrovia submission: the nearest stations are Euston and Paddington and Marylebone and London King's Cross; addresses are written to LONDON; dialling code 020; heritage assets close by include Grade II Listed building. Site plans are drawn to the address as Camden Council holds it.

Fitzrovia postcode coverage

Surveys run across W1T (Fitzrovia), which Fitzrovia holds on its own throughout Camden.

Streets and stations in Fitzrovia

The Fitzrovia streets on our books include Fitzroy Square, Charlotte Street, Rathbone Place, Gresse Street, Euston Road, Oxford Street, Great Portland Street and Tottenham Court Road. most Fitzrovia sites are within walking distance of Euston or Paddington or Marylebone. and Grade II Listed building is listed, which pulls neighbouring W1T proposals into a setting assessment.

Areas we cover around Fitzrovia

We take instructions from Camden Town (NW1), Hampstead (NW3), Primrose Hill (NW1), Kentish Town (NW5), Belsize Park (NW3), Bloomsbury (WC1) and everywhere between them and Fitzrovia.

You know the number before the surveyor is booked. What moves the number on a Fitzrovia job is the georgian terraces itself — party walls, level changes, and whether Bloomsbury pulls a heritage statement into scope.

Statutory application fees are set by regulation, not by the council: £548 householder, £610 for a new dwelling, £274 for a lawful development certificate, £249 for prior approval.

Fitzrovia applicants pay the statutory fee direct to London Borough of Camden. London planning approval-rate dataset · Camden planning · our London architectural drawings service · architectural drawings in Camden Town.

Chartered accountability applies to every W1T drawing we issue. Marginal W1T sites get checked with Camden Council first; a refusal costs far more than the advice fee.

Drawings are produced by chartered members of the Chartered Institute of Architectural Technologists (MCIAT), the professional body for technical design and building-regulations competence. First-time approval across our London caseload is 98%. Statutory fees shown are those in force in England in 2026 under the Town and Country Planning (Fees for Applications) Regulations. Confirm your local authority at gov.uk and submission requirements on the Planning Portal. Studio: 71–75 Shelton Street, London WC2H 9JQ.

Book the Fitzrovia survey and the drawings follow within the agreed programme. This Fitzrovia page was reviewed in August 2026.