Measured floor plans and elevations across NW5. For a Kentish Town property the determining body is Camden Council, and the Camden Local Plan is the policy it applies.
In Kentish Town, architectural drawings are scaled Kentish Town floor plans, elevations and sections describing a NW5 property as existing and as proposed. they start with a laser measured survey of the Kentish Town address and carry every NW5 submission to Camden Council, householder application through to full plans. The policy applied across NW5 is the Camden Local Plan, administered by Camden Council.
An Article 4 Direction applies across Camden, so check it before assuming Kentish Town permitted development survives. The fabric of Kentish Town is Victorian terraced streets, gentrifying, so a NW5 proposal is judged on fit before it is judged on size. Conservation status changes the Kentish Town route entirely — Bloomsbury being the usual case among the 40 designations in Camden. That check comes before anything else on a Kentish Town job.
That check — Article 4 directions against the Kentish Town property — happens on day one. The victorian terraces in Kentish Town decides the depth before policy does. The borough policy layer over every NW5 address is set out on Camden planning. The Kentish Town survey then carries into loft conversion drawings in Kentish Town if the project runs on to construction.



One to two weeks at London Borough of Camden before a Kentish Town case reaches an officer. The first visit to Kentish Town is a measured survey — every room, every opening, every level change recorded on site.
Statutory periods: 8 weeks from validation for a householder application, 13 weeks for a major scheme, 6 weeks for prior approval with a 21 days neighbour consultation, and 5 weeks for a full plans building control submission. A party structure notice requires one month notice and two months where excavation is involved.
Amendments during the Kentish Town determination are handled without a resubmission where possible. You get the full Kentish Town set as PDFs, plus CAD on request.
Objections on a Kentish Town case usually come from the immediate neighbours, not the wider NW5 area. Roof pitch and eaves height on a Kentish Town house are measured, not scaled off.
Serve party wall notices early where NW5 neighbours share a flank wall — on Kentish Town terraces they nearly always do. Once consent is granted, house extension drawings follows for the NW5 property.
Kentish Town is characterised by victorian terraces, concentrated across NW5 in the Kentish Town / Gospel Oak area. How the victorian terraces in Kentish Town was built decides what can be opened up and where the load has to go. On the ground in Kentish Town, victorian terraces here have settled and bowed, and a survey drawn to ±3 mm catches that before the steel is ordered rather than after. On Camden stock it changes the party wall position. Because the Kentish Town streetscape near Kentish Town City Farm is consistent, departures in ridge height read immediately in an officer report.
A NW5 dig turns on engineering more than on policy. A Kentish Town survey done once feeds planning permission for NW5 properties and building regulations drawings later.
The drawing schedule for a Kentish Town project runs as follows.
Surveyors travel to NW5 addresses from the studio; the nearest stations are South Kentish Town, Lots Road Power Station, Kentish Town station, Gospel Oak. Appointments are booked in Kentish Town on weekdays and Saturdays, and the measured survey of a standard victorian terraces takes two to three hours.
on Ordnance Survey grid reference TQ285845, with the River Fleet shaping drainage and flood-risk questions on lower-lying NW5 plots, inside the Holborn and St Pancras parliamentary constituency, and first recorded as a settlement in 1207, which is why the older Kentish Town plots have irregular boundaries. Location and block plans for Kentish Town start from that grid square. Source.
Practical detail for a Kentish Town submission: the closest stations to a NW5 site are South Kentish Town and Lots Road Power Station and Kentish Town station and Gospel Oak; NW5 addresses are written to LONDON; dialling code 020. Site plans are drawn to the address as Camden Council holds it.
From NW5 (Kentish Town / Gospel Oak), shared with Gospel Oak, the Kentish Town process is the same but the constraints are not.
We survey Kentish Town addresses on Belsize Park, York Way, Camden Road, Little Green Street, Tufnell Park and Dartmouth Park. most Kentish Town sites are within walking distance of South Kentish Town or Lots Road Power Station or Kentish Town station.
Besides Kentish Town: Neasden (NW10, NW2), Cricklewood (NW2), Sudbury (HA0), Barbican (EC2Y), Smithfield (EC1A), Fleet Street (EC4), plus Haringey across the border.

What changes a Kentish Town fee is the property: victorian terraces construction, shared walls on NW5, and whether heritage input is needed.
Statutory application fees are set by regulation, not by the council: £548 householder, £610 for a new dwelling, £274 for a lawful development certificate, £249 for prior approval.
That charge is London Borough of Camden's, taken when the Kentish Town application is lodged. London planning approval-rate dataset · Camden planning · Architectural Drawings London-wide · architectural drawings in Neasden.
Kentish Town work is issued under MCIAT charter, the technical-design and building-regulations qualification. Where a Kentish Town case is borderline — a corner plot near Kentish Town City Farm, a Bloomsbury frontage, a flank wall hard onto a NW5 neighbour — we buy pre-application advice from Camden Council rather than gamble the statutory 8 weeks.
Drawings are produced by chartered members of the Chartered Institute of Architectural Technologists (MCIAT), the professional body for technical design and building-regulations competence. First-time approval across our London caseload is 98%. Statutory fees shown are those in force in England in 2026 under the Town and Country Planning (Fees for Applications) Regulations. Confirm your local authority at gov.uk and submission requirements on the Planning Portal. Studio: 71–75 Shelton Street, London WC2H 9JQ.
The first step for a Kentish Town owner is a measured survey, not a design. This Kentish Town page was reviewed in August 2026.
Not for every Kentish Town project. Where the house is unlisted and clear of Bloomsbury, permitted development may cover the work. An Article 4 Direction applies across Camden, so check it before assuming Kentish Town permitted development survives.
Check Bloomsbury first. Camden designates 40 areas, and Kentish Town sits against that one most often.
Mainly victorian terraces in Kentish Town, all of it laser-measured before design.
Across Camden — Neasden among them — and into Haringey. Each NW5 street is assessed on its own designations, which is why the pages are separate.

architectural drawing services · Camden planning · Architectural Drawings London-wide
Talk to a technologist about your Kentish Town property — no obligation.
Get my quote