Chartered loft conversion plans for the W1U, W1G, W1H area. No hourly billing, and around 30% below typical London architect rates. Marylebone falls under Westminster City Council, so the Westminster Local Plan governs what gets consent.
Loft Conversion Drawings for a property in Marylebone are measured Marylebone plans, sections and elevations turning a roof space into habitable W1U, W1G, W1H rooms. on the georgian terraces they prove 2.2 m head height for Marylebone and hold the 40 m³ or 50 m³ volume unless Westminster City Council grants consent, and Westminster City Council weighs the scheme against the Westminster Local Plan.
An Article 4 Direction applies across Westminster, so check it before assuming Marylebone permitted development survives. You cannot design for Marylebone without accounting for the fact that it is Georgian and Victorian terraces, mansion blocks. Westminster has 56 conservation areas, and Belgravia is the one that most often covers Marylebone stock. We plot the Marylebone site against the designation before quoting.
Article 4 directions are checked street by street in Marylebone; the borough-wide answer is rarely the whole answer. A W1U survey answers most of it — where the georgian terraces allows the rear wall to go. The borough policy layer over every W1U, W1G, W1H address is set out on Westminster planning. The Marylebone survey then carries into architectural drawings in Marylebone if the project runs on to construction.



Validation alone costs City of Westminster one to two weeks even when the Marylebone pack is complete, and that queue — not the determination — is where most W1U, W1G, W1H delay starts. Step one at a W1U, W1G, W1H address is a full measured survey of the existing building.
Statutory periods: 8 weeks from validation for a householder application, 13 weeks for a major scheme, 6 weeks for prior approval with a 21 days neighbour consultation, and 5 weeks for a full plans building control submission. A party structure notice requires one month notice and two months where excavation is involved.
City of Westminster publishes the Marylebone application online during consultation. The set is checked against the City of Westminster validation list before it goes in.
The Marylebone consultation period is where a weak scheme is exposed. Drainage runs and manhole positions on the W1U plot are picked up on the day.
Party wall procedure runs alongside the Marylebone application, not after it. Once consent is granted, planning permission follows for the W1U property.
Marylebone is characterised by georgian terraces, edwardian mansion blocks, concentrated across W1U, W1G, W1H in the Marylebone area. Marylebone is not uniform, but the georgian terraces recurs often enough across W1U, W1G, W1H that the structural pattern is predictable once measured. For a typical Marylebone house, georgian roofs here are shallow and often behind a parapet, so the usable volume comes from a rear dormer set below the ridge rather than from the front slope. That detail drives the W1U construction sequence. The blocks around Marylebone High Street set the prevailing eaves and ridge lines, and Westminster City Council officers reference that rhythm when assessing height and massing on a Marylebone street.
Digging down in Marylebone runs into policy: Westminster basement policy restricts to single-storey, typically under 50% of rear garden footprint; lightwells and rooflights strictly controlled in conservation areas. Where the project also touches building regulations drawings for W1U properties or house extension drawings, the same measured survey of the Marylebone property carries across — you pay for the survey once, not per application.
For a W1U, W1G, W1H address the deliverables are fixed, not open-ended.
Surveyors travel to W1U addresses from the studio; the nearest stations are Marylebone station, Baker Street, Bond Street, Edgware Road. Appointments are booked in Marylebone on weekdays and Saturdays, and the measured survey of a standard georgian terraces takes two to three hours.
Marylebone lies 2 miles (3.2 km) north-west of Charing Cross, on Ordnance Survey grid reference TQ285815. A W1U submission is checked against exactly that location before Westminster City Council will register it. Source.
Practical detail for a Marylebone submission: Marylebone is served by Marylebone station and Baker Street and Bond Street and Edgware Road; the postal town here is LONDON; dialling code 020; listed fabric nearby includes Grade II Paul McCartney. Site plans are drawn to the address as Westminster City Council holds it.
The districts we work in here: W1U (Marylebone), which Marylebone holds on its own; W1G (Harley Street / Marylebone), which Marylebone holds on its own; W1H (Marylebone), which Marylebone holds on its own. Which side of the W1U line a property sits on changes the Westminster constraints that apply.
Streets we survey in Marylebone include Cavendish Square, Marylebone High Street, Portland Place, Wigmore Street, Oxford Street, Lisson Grove, Marylebone Lane and Regent's Park. most Marylebone sites are within walking distance of Marylebone station or Baker Street or Bond Street. and Grade II Paul McCartney is listed, which pulls neighbouring W1U proposals into a setting assessment.
We take instructions from Roehampton (SW15), Clapham (SW4), Brixton (SW2, SW9), Herne Hill (SE24), Kennington (SE11), Streatham (SW16) and everywhere between them and Marylebone.

Price differences between Marylebone projects come from the fabric — the georgian terraces, level changes, and any Belgravia heritage requirement.
Statutory application fees are set by regulation, not by the council: £548 householder, £610 for a new dwelling, £274 for a lawful development certificate, £249 for prior approval.
The statutory charge on a Marylebone application goes to City of Westminster at submission. London planning approval-rate dataset · Westminster planning · loft conversion drawings across London · loft conversion drawings in Roehampton.
Drawings for Marylebone are issued under MCIAT charter, which is the technical design and construction-detailing qualification rather than an RIBA registration. If your Marylebone site is tight — Wigmore Hall in the setting, a Belgravia designation, a shared flank wall — we test it with Westminster City Council first rather than submit and hope.
Drawings are produced by chartered members of the Chartered Institute of Architectural Technologists (MCIAT), the professional body for technical design and building-regulations competence. First-time approval across our London caseload is 98%. Statutory fees shown are those in force in England in 2026 under the Town and Country Planning (Fees for Applications) Regulations. Confirm your local authority at gov.uk and submission requirements on the Planning Portal. Studio: 71–75 Shelton Street, London WC2H 9JQ.
A short call about the Marylebone property is usually enough to scope the job. This Marylebone page was reviewed in August 2026.
Sometimes. The test for a Marylebone property is house versus flat, listed versus not, and inside Belgravia versus outside. An Article 4 Direction applies across Westminster, so check it before assuming Marylebone permitted development survives. We establish which applies at the W1U survey rather than guessing from the street.
Belgravia is the designation to check first — one of 56 in Westminster. Within its boundary a Marylebone proposal is judged against the area appraisal, and materials and window detail start to matter as much as size.
The Marylebone stock is georgian terraces, edwardian mansion blocks. Whatever the planning route, the georgian terraces decides the structural work, which is why the W1U survey comes before the design.
We survey anywhere in Westminster and City of London, Marylebone and Roehampton included.

loft conversions · Westminster planning · loft conversion drawings across London