Measured floor plans and elevations across W6. Because Hammersmith falls within Hammersmith and Fulham, your case officer sits at Hammersmith & Fulham Council and works to the Hammersmith and Fulham Local Plan rather than a national standard.
For a Hammersmith property, architectural drawings means scaled Hammersmith floor plans, elevations and sections describing a W6 property as existing and as proposed. Hammersmith & Fulham Council determines them under Hammersmith and Fulham Local Plan policy — they start with a laser measured survey of the Hammersmith address and carry every W6 submission to Hammersmith & Fulham Council, householder application through to full plans.
An Article 4 Direction applies across Hammersmith and Fulham, so check it before assuming Hammersmith permitted development survives. Officers see Hammersmith as Victorian terraces, riverside character — design that ignores it struggles. Inside the Brackenbury Village boundary — one of 45 such designations in Hammersmith and Fulham — a Hammersmith scheme normally goes straight to a full Hammersmith & Fulham Council application rather than relying on permitted development. The designation map is read street by street in Hammersmith.
The Hammersmith Article 4 position is established at survey, before design. Measure a W6 property and the victorian terraces answers most of it — where the original rear wall sat, and what height the Hammersmith street will carry. The borough policy layer over every W6 address is set out on Hammersmith and Fulham planning. The Hammersmith survey then carries into planning permission in Hammersmith if the project runs on to construction.



Validation alone costs London Borough of Hammersmith and Fulham one to two weeks even when the Hammersmith pack is complete, and that queue — not the determination — is where most W6 delay starts. The first visit to Hammersmith is a measured survey — every room, every opening, every level change recorded on site.
Statutory periods: 8 weeks from validation for a householder application, 13 weeks for a major scheme, 6 weeks for prior approval with a 21 days neighbour consultation, and 5 weeks for a full plans building control submission. A party structure notice requires one month notice and two months where excavation is involved.
London Borough of Hammersmith and Fulham publishes the Hammersmith application online during consultation. Nothing leaves for a Hammersmith address until it matches the local validation checklist.
London Borough of Hammersmith and Fulham weighs material objections only — a Hammersmith neighbour disliking the design is not one. Everything drawn for a W6 address traces back to a measurement taken on site.
Serve W6 party wall notices before work starts, not after. Once consent is granted, building regulations drawings follows for the W6 property.
Hammersmith is characterised by victorian terraces, mansion blocks, concentrated across W6 in the Hammersmith / Brackenbury Village area. What the victorian terraces in Hammersmith allows is a construction question first and a planning question second, and the survey answers it. Reading that across to Hammersmith stock: victorian terraces here have settled and bowed, and a survey drawn to ±3 mm catches that before the steel is ordered rather than after. That is the Hammersmith constraint Hammersmith & Fulham Council will look for. The W6 terrace sets the datum; departures from it show up in the officer report.
Hammersmith and Fulham sets no special basement rule, so a Hammersmith lower-ground scheme stands or falls on the engineering and the neighbours. We do not re-measure a W6 property for each stage of the job.
The Hammersmith package covers every sheet London Borough of Hammersmith and Fulham asks for.
Surveyors travel to W6 addresses from the studio; the nearest stations are Hammersmith power station, coal-fired power station, Hammersmith, West Kensington. Appointments are booked in Hammersmith on weekdays and Saturdays, and the measured survey of a standard victorian terraces takes two to three hours.
Hammersmith lies 4.3 miles (6.9 km) southwest of Charing Cross, on Ordnance Survey grid reference TQ233786, with the River Thames shaping drainage and flood-risk questions on lower-lying W6 plots, inside the Hammersmith and Chiswick parliamentary constituency. We plot the Hammersmith site from that reference rather than from a sale plan. Source.
Practical detail for a Hammersmith submission: residents use Hammersmith power station and coal-fired power station and Hammersmith and West Kensington; post town LONDON; dialling code 020. Site plans are drawn to the address as Hammersmith & Fulham Council holds it.
We draw W6 (Hammersmith / Brackenbury Village), shared with Brackenbury Village addresses, and Hammersmith & Fulham Council validates each on the address itself.
Around Hammersmith that means Notting Hill, Hammersmith Broadway, Brook Green, Cambridge Grove, Furnivall Gardens, Furnival Gardens and Ravenscourt Park. most Hammersmith sites are within walking distance of Hammersmith power station or coal-fired power station or Hammersmith.
We survey across Park Royal (NW10), Chiswick (W4), Brentford (TW8), Isleworth (TW7), Hounslow (TW3), Feltham (TW13) as well as Hammersmith itself, plus the Wandsworth side of the boundary.

What changes a Hammersmith fee is the property: victorian terraces construction, shared walls on W6, and whether heritage input is needed.
Statutory application fees are set by regulation, not by the council: £548 householder, £610 for a new dwelling, £274 for a lawful development certificate, £249 for prior approval.
On a Hammersmith submission the statutory element is London Borough of Hammersmith and Fulham's, not ours. London planning approval-rate dataset · Hammersmith and Fulham planning · architectural drawings in London · architectural drawings in Park Royal.
MCIAT chartered technologists handle every W6 submission we make. When a Hammersmith case could go either way we pay for Hammersmith & Fulham Council pre-application advice rather than test it live.
Drawings are produced by chartered members of the Chartered Institute of Architectural Technologists (MCIAT), the professional body for technical design and building-regulations competence. First-time approval across our London caseload is 98%. Statutory fees shown are those in force in England in 2026 under the Town and Country Planning (Fees for Applications) Regulations. Confirm your local authority at gov.uk and submission requirements on the Planning Portal. Studio: 71–75 Shelton Street, London WC2H 9JQ.
The first step for a Hammersmith owner is a measured survey, not a design. This Hammersmith page was reviewed in August 2026.
Frequently not. A Hammersmith house that is unlisted and outside Brackenbury Village normally retains permitted development. An Article 4 Direction applies across Hammersmith and Fulham, so check it before assuming Hammersmith permitted development survives. We confirm it at survey.
Hammersmith and Fulham has 45 conservation areas; the one that matters for a W6 address is normally Brackenbury Village.
Hammersmith work is largely victorian terraces, mansion blocks, surveyed on site rather than from old plans.
Yes. Hammersmith and Fulham in full, Park Royal included, and the Wandsworth side of the boundary — though the victorian terraces and designations change as you move.

architectural drawing services · Hammersmith and Fulham planning · architectural drawings in London
Free Hammersmith survey, and we deal with Hammersmith & Fulham Council for you.
Get my quote