Structural Engineering Calculations in Greenwich

Which Greenwich postcodes does this structural calculation package service cover?

Every Greenwich postcode district we draw in, the stock that dominates it and the authority that validates a structural calculation package there. Greenwich fees below are the statutory England rates for 2026, not structural calculation package estimates.

What changes about a structural calculation package in each part of Greenwich?

Roof pitch, wall build-up and plot depth change every few Greenwich streets, and each one changes what a structural calculation package can achieve at that address.

• Charlton (SE7) — Victorian villas, 1930s semi-detached defines Charlton, where victorian villas, 1930s semi-detached set what a structural calculation package can do. Victorian terraces here need a beam and padstone schedule for every removed wall across SE7. Any Charlton structural calculation package is validated by Greenwich Council, with Charlton House the usual Charlton reference point on the site plan.
• Woolwich (SE18) — structural calculation package work in Woolwich means georgian fragments, post-war estates, new-build. Woolwich is Georgian arsenal heritage, riverside regen. Georgian houses here carry load on solid walls and timber joists throughout SE18. Greenwich Council decides the Woolwich application, and Royal Arsenal anchors the Woolwich location plan.
• Eltham (SE9) — structural calculation package work in Eltham means 1930s semi-detached, post-war flats. Eltham is 1930s semi-detached, Tudor fragments. 1930s semis here usually take a single steel across the rear throughout SE9. Greenwich Council decides the Eltham application, and Eltham Palace anchors the Eltham location plan.
• Blackheath (Greenwich) (SE3) — Georgian villas around the heath defines Blackheath (Greenwich), where georgian villas, victorian terraces set what a structural calculation package can do. Georgian houses here carry load on solid walls and timber joists across SE3. Any Blackheath (Greenwich) structural calculation package is validated by Greenwich Council, with Blackheath Common the usual Blackheath (Greenwich) reference point on the site plan.
• Thamesmead (SE28) — post-war estate, Brutalist origins, regen defines Thamesmead, where post-war estates, new-build set what a structural calculation package can do. Post-war frames here may be load-bearing concrete across SE28. Any Thamesmead structural calculation package is validated by Greenwich Council, with Thamesmead Town Centre the usual Thamesmead reference point on the site plan.
• Kidbrooke (SE3) — regenerated quarter, new-build estate defines Kidbrooke, where new-build, post-war fragments set what a structural calculation package can do. Post-war frames here may be load-bearing concrete across SE3. Any Kidbrooke structural calculation package is validated by Greenwich Council, with Kidbrooke Village the usual Kidbrooke reference point on the site plan.
• New Eltham (SE9) — 1930s semi-detached defines New Eltham, where 1930s semi-detached set what a structural calculation package can do. 1930s semis here usually take a single steel across the rear across SE9. Any New Eltham structural calculation package is validated by Greenwich Council, with New Eltham station the usual New Eltham reference point on the site plan.

What local planning policy applies to a structural calculation package in Greenwich?

How designation changes a Greenwich structural calculation package: Greenwich Council maintains 20 conservation areas, including Greenwich Town Centre (World Heritage Site), Blackheath, Charlton. Inside any of them a Greenwich structural calculation package cannot rely on permitted development, and the route becomes a £548 householder application determined in 8 weeks rather than a £249 prior approval in 6 weeks. Greenwich Town Centre (World Heritage Site) sets the tone for Greenwich casework.

Article 4 and your Greenwich structural calculation package: Greenwich Council has made no borough-wide direction, so permitted development for a structural calculation package in Greenwich generally survives outside Greenwich conservation areas and listed curtilages. A Lawful Development Certificate at £274 is how a SE2 owner records that a structural calculation package was lawful.

Greenwich housing stock: Georgian in Greenwich town centre; Victorian terraces in East Greenwich, Charlton; inter-war semi-detached in Eltham; new-build along the riverside. World Heritage Site status in Greenwich town centre adds heritage weight; outer borough areas (Eltham, Thamesmead) generally permissive. Read that before choosing a structural calculation package route in Greenwich — construction, not postcode, sets what is achievable. Greenwich Council charges £548 for a householder application and has 8 weeks to determine it.

Which neighbouring authorities border Greenwich?

• Bromley — cross the Greenwich boundary and Bromley Council takes the structural calculation package instead, applying 48 conservation areas of its own around BR1. We re-price structural calculations at the Greenwich edge because Bromley policy and Greenwich policy rarely align on structural calculation package depth.
• Newham — the Newham boundary runs against Greenwich, so a structural calculation package a street from Greenwich is decided by Newham Council instead. Newham runs 10 conservation areas across E6 and its neighbours, which is why structural calculations priced for Greenwich are re-checked against Newham policy whenever the Greenwich address sits on that edge.
• Tower Hamlets — cross the Greenwich boundary and Tower Hamlets Council takes the structural calculation package instead, applying 58 conservation areas of its own around E1. We re-price structural calculations at the Greenwich edge because Tower Hamlets policy and Greenwich policy rarely align on structural calculation package depth.
• Lewisham — adjoining Greenwich, with 30 conservation areas centred on SE3. A structural calculation package on the far side of the Greenwich line is determined by Lewisham Council, so the Greenwich quote for structural calculations is checked against Lewisham guidance before it is issued.

Sources for this Greenwich structural calculation package page: borough policies maps and conservation-area registers (2025–26), Royal Mail postcode district boundaries, the Town and Country Planning (Fees for Applications) (England) Regulations, the Town and Country Planning (General Permitted Development) (England) Order 2015 as amended, and the Party Wall etc. Act 1996.