Architectural Drawings in Petts Wood | Fixed-Fee Plans

No Article 4 Direction covers Bromley, which keeps the Petts Wood permitted-development route open on unlisted houses. Petts Wood is 1930s semi-detached, garden suburb — a architectural drawings submission has to answer that context rather than a generic London template. Bromley has 48 conservation areas, and Beckenham is the one that most often covers Petts Wood stock. The designation map is read street by street in Petts Wood.

Before drawing anything for Petts Wood, we check Article 4 directions against the BR5 boundary. The Petts Wood numbers come off the building: rear wall, levels, ridge against Petts Wood station. The borough policy layer over every BR5 address is set out on Bromley planning. The Petts Wood survey then carries into house extension drawings in Petts Wood if the project runs on to construction.

Before Bromley Council determines anything, London Borough of Bromley has to validate the Petts Wood submission — one to two weeks, longer if a plan is missing. Survey first: we measure the Petts Wood property in person, then draw the existing plans, sections and elevations from that data.

Statutory periods: 8 weeks from validation for a householder application, 13 weeks for a major scheme, 6 weeks for prior approval with a 21 days neighbour consultation, and 5 weeks for a full plans building control submission. A party structure notice requires one month notice and two months where excavation is involved.

Most Petts Wood householder cases are decided under delegated powers, not committee. We issue the BR5 drawings numbered and revision-controlled.

We design Petts Wood schemes to answer the amenity objection before it is written. A Petts Wood survey takes two to three hours and needs access to every room.

Party wall procedure runs alongside the Petts Wood application, not after it. Once consent is granted, planning permission follows for the BR5 property.

Petts Wood is characterised by 1930s semi-detached, concentrated across BR5 in the Orpington / Petts Wood area. How the 1930s semi-detached in Petts Wood was built decides what can be opened up and where the load has to go. On BR5 plots specifically, 1930s semis here are dimensionally consistent, so the survey is quick and the drawings come back inside the shorter end of the window. It is the first thing checked at the Petts Wood survey. Ridge and eaves lines along Petts Wood streets are the reference Bromley Council uses.

Digging under a Petts Wood house is a structural question before a planning one. If a Petts Wood project extends into building regulations drawings for BR5 properties or loft conversion drawings, the survey is already done.

What the Petts Wood drawing pack contains

What lands in your inbox after a Petts Wood survey:

• laser measured survey for the Petts Wood property
• existing floor plans at 1:50
• proposed floor plans
• all elevations
• site and location plans

Local landmarks that shape a Petts Wood application

• Jubilee Country Park — roof profiles that set the ridge datum Bromley Council measures a Jubilee Country Park dormer against.
• Petts Wood station — schemes visible from it get closer scrutiny in Bromley.
• Dudleston Heath — height and massing nearby are argued against this frontage.
• Bromley Common — it anchors the Petts Wood streetscape argument in an officer report.

Getting to a Petts Wood survey

Surveyors travel to BR5 addresses from the studio; the nearest stations are Petts Wood, Petts Wood station, London Victoria, Bromley South. Appointments are booked in Petts Wood on weekdays and Saturdays, and the measured survey of a standard 1930s semi-detached takes two to three hours.

Where Petts Wood sits

on Ordnance Survey grid reference TQ445675. The BR5 block plan is set out from that grid square. Source.

Practical detail for a Petts Wood submission: the nearest stations are Petts Wood and Petts Wood station and London Victoria and Bromley South; ORPINGTON is the post town on Petts Wood addresses; dialling code 01689. Site plans are drawn to the address as Bromley Council holds it.

Petts Wood postcode coverage

BR5 (Orpington / Petts Wood), shared with Orpington — all within our Petts Wood survey radius.

Streets and stations in Petts Wood

Streets we survey in Petts Wood include Jubilee Country Park. most Petts Wood sites are within walking distance of Petts Wood or Petts Wood station or London Victoria.

Areas we cover around Petts Wood

We take instructions from Coulsdon (CR5), Addiscombe (CR0), Shirley (CR0), Selhurst (SE25), Bermondsey (SE1, SE16), Borough (SE1) and everywhere between them and Petts Wood.

The fee follows the building. On Petts Wood stock that means party walls, levels, and the Beckenham heritage question.

Statutory application fees are set by regulation, not by the council: £548 householder, £610 for a new dwelling, £274 for a lawful development certificate, £249 for prior approval.

Those statutory fees go to London Borough of Bromley on submission. London planning approval-rate dataset · Bromley planning · the London architectural drawings pillar page · architectural drawings in Coulsdon.

An MCIAT chartered technologist owns the Petts Wood project from survey to decision. If your Petts Wood site is tight — Petts Wood station in the setting, a Beckenham designation, a shared flank wall — we test it with Bromley Council first rather than submit and hope.

Drawings are produced by chartered members of the Chartered Institute of Architectural Technologists (MCIAT), the professional body for technical design and building-regulations competence. First-time approval across our London caseload is 98%. Statutory fees shown are those in force in England in 2026 under the Town and Country Planning (Fees for Applications) Regulations. Confirm your local authority at gov.uk and submission requirements on the Planning Portal. Studio: 71–75 Shelton Street, London WC2H 9JQ.

Start with the free Petts Wood survey — nothing is committed until you have the fee. This Petts Wood page was reviewed in August 2026.